Windows Vista Dial-up Configuration

These are the instructions for configuring Windows Vista to connect via dial-up to SpiritOne.

1. Click on the Windows button and select Connect To

2. From the Show drop-down menu, choose Dial-up and VPN.
3. Click on Set up a connection or network.

4. Choose Connect to the Internet.
5. Hit Next.

6. Select Dial-up.

7. In the Dial-up phone number field, type the correct phone number for your area code and city, found at the top of this page.
8. In the User name box, type your entire SpiritOne or Aracnet email address in all lower-case letters.
9. In the Password field, type your SpiritOne password.
10. Check the Remember Password box.
11. In the Connection name box, type "SpiritOne."
12. Hit Connect.

13. At this point, if your phone line is available and everything is plugged in correctly, you'll be connected to the Internet. If you're unable to connect, you'll see the following screen.

14. Select Set up the connection anyway.

15. Hit Close.
16. That should do it! Your computer is now configured to connect to SpiritOne via a dial-up connection.