(see image 1 - X4 basic)
1 - Point web browser to the address 192.168.1.1 - log in with username admin and password zoomadsl
2 - Change Protocol to 1483 Bridged IP + NAT
3 - Make VPI 0 (zero)
4 - Add VCI 32 (for Qwest) or 35 (for Verizon/Frontier)
5 - Change to Use the Following IP Address
6 - Enter the appropriate IP Address, Subnet Mask and Gateway for the DSL circuit (this will be different than those appearing in the image - check your documentation)
7 - Change DNS to 216.99.193.2
8 - Select the Save/Reboot button at the bottom of the page
The modem will restart.
(see image 2 - X4 dns)
1 - Point web browser to the address 192.168.1.1 - log in with username admin and password zoomadsl
2 - Select Advanced Setup on the left
3 - Select DNS
4 - Enter 216.99.193.19 for Secondary DNS server
5 - Select the Save button at the bottom of the page
